洛杉矶+ 绘制来源和使用错误( U)
Pending
- resolved
2026年10月26日, Draw Source & Useries,在查看和更新绘图细节时出错,从2026年10月26日大约4:03 PM CT开始. 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
37 Built Technologies incidents · 2025年11月 — official updates, affected components, duration and resolution details.
2026年10月26日, Draw Source & Useries,在查看和更新绘图细节时出错,从2026年10月26日大约4:03 PM CT开始. 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
目前正在调查2026年10月23日11:58AM CDT发现的一起事件的原因, 目前我们不知道事件的原因,也没有估计解决的时间。 我们将随时提供最新情况,我们赞赏你在努力解决这一问题时的耐心.
导致部分CLA+用户在2026年10月23日大约11:59AM CDT时, 这个问题仅限于如何显示绘图,我们没有迹象表明基本的绘图数据受到影响。 同时,一些绘图列表可能暂时显示陈旧的数据. 对于任何不便,我们表示歉意,并将随时通知你,因为我们掌握了更多信息。 感谢你在我们努力解决这一问题时的理解.
大约2:10 PM CT时,我们针对这起事件实施了一个固定方案,从10/23/2026上大约11:59 AM CT开始,在CLA+上引发了引人注意的问题。 先前存在的图纸可能仍然显得缺少或不完整,而固定则适用于完整的一组历史图纸. 在这次事件中没有丢失或损坏任何数据 -- -- 影响仅限于图纸的能见度。 修复工作完成后, 谢谢你的耐心 我们对此造成的任何不便表示歉意.
截至3:00,我们已确认完全解决了造成问题的事件,从大约11:59 AM CT在10/23/2026上开始,在CLA+上画出可见度. 在这次事件中没有丢失或损坏任何数据 -- -- 影响仅限于图纸的能见度。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
10: 29 CT 8,我们发现CLA发生一起事件, 阻止新注册用户登录, 我们对此可能造成的任何不便表示歉意,并正在努力尽快解决这一问题。 我们将随时提供最新情况,我们赞赏你的耐心.
从10/8日的2:26 PM CT开始,我们仍在积极调查CLA中一个已查明的问题,这个问题正在阻止新注册的用户登录. 我们对此可能造成的任何不便表示歉意,并正在努力尽快解决这一问题。 我们将随时提供最新情况,我们赞赏你的耐心.
截止到10/8日的3:38 PM CT,我们确认在CLA中解决了这个问题,阻止了新注册的用户登录. 受影响的用户现在应能够成功地登记和注册到其已建账户。 我们对此造成的不便表示歉意,并感谢你的耐心.
自动翻译自官方事件更新。
我们正在调查一起影响人工智能提取流的事件, 最早是在周四上午10点38分发现的。 利用这些流量的用户可能会发现处理步骤无限期地挂起. 我们的团队正在努力查明原因并尽快恢复正常服务。 我们对中断表示歉意,一旦掌握了更多信息,我们将再次通报最新情况.
我们查明了一起影响AI提取流事件的原因, 最早是在周四上午10点38分发现的。 利用这些流量的用户可能会发现处理步骤无限期地挂起. 我们的团队正在努力查明原因并尽快恢复正常服务。 我们对中断表示歉意,一旦掌握了更多信息,我们将再次通报最新情况.
截至11:17 AM CT, 我们的团队正在部署一个固定 解决事件 影响AI提取流量, 首次识别 在10:38 周四 AM Central, 10/8。 利用这些流量的用户可能会发现处理步骤无限期地挂起. 我们的团队正在努力尽快恢复正常服务. 我们对中断表示歉意,一旦掌握了更多信息,我们将再次通报最新情况.
大约11:50 AM CT,我们实施了一个解决影响AI取出流事件的固定方案,首次发现的是周四10:38 AM Central. 我们的团队正在努力尽快恢复正常服务. 我们正在密切监测局势,以确保这一问题得到全面解决。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
我们解决了影响AI提取流的事件, 预期功能已恢复。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
我们目前正在调查一个在7月10日下午1点57分发现的影响到LWIO的事件,在设定留置权豁免时造成间歇性故障,包括错误和请求暂停。 我们对此可能造成的任何不便表示歉意,并正在努力尽快解决这一问题。 目前,我们没有关于事件原因的任何进一步细节,也没有估计解决的时间。 我们将随时提供最新情况,我们赞赏你在努力解决这一问题时的耐心.
大约在7月10日的2:43 PM CT, 我们实施了一个固定事件, 我们正在密切监测局势,以确保这一问题得到全面解决。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
从10/7日的3:45 PM CT开始, 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
从下午1点51分起,我们正在监控一起影响CLA+资金目的地的事件,事件于10月5日星期一下午1点24分首次发现. 核心功能已经恢复,虽然原因尚未完全确定. 谢谢你在我们努力争取全面解决时的耐心.
我们正在调查一起影响CLA+资金目的地的事件,10月5日,周一下午1:24首次确认. 原因尚未确定,目前我们还没有估计解决的时间. 我们一有消息就分享 谢谢你在我们努力解决这个问题时的耐心.
从下午2点16分起,我们正在监控一起影响CLA+资金目的地的事件,10月5日,星期一下午1点24分首次确认. 核心功能已经恢复,虽然原因尚未完全确定. 谢谢你在我们努力争取全面解决时的耐心.
10月5日周一下午1:24, 影响CLA+资金目的地的事件已经解决, 谢谢你的耐心 在我们工作期间.
自动翻译自官方事件更新。
我们正在调查9月2日2:13PM CT发现的一起事件的原因, 报告或文件正在送交我们的服务器, 需要通过SFTP来取取, 目前我们不知道事件的原因,也没有估计解决的时间。 我们将随时提供最新情况,我们赞赏你在努力解决这一问题时的耐心.
我们找出了影响Built服务器的文件定位问题的根源,9月2日大约从2:13PM CT开始. 我们正在研究一个将恢复全部功能的解决办法。 对于任何不便,我们表示歉意,并将随时通知你,因为我们掌握了更多信息。 感谢你在我们努力解决这一问题时的理解.
大约在4:25PM CT时,我们针对文件位置问题实施了一个文件能见度修正,这些文件会影响正在交给我们的服务器的报告或文件,需要从9月2日大约2:13PM CT起通过SFTP来取取. 在此期间没有数据丢失. 我们正在密切监测局势,以确保这一问题得到全面解决。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
9月2日5:25PM CT, 我们已确认完全解决了影响我们服务器的报告或文件的问题, ** 在此期间没有丢失数据。 ** 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
我们已确认QuickBooks/Intuit API的停用, 影响建设一体化, 他们正在研究一个能够恢复全部功能的解决方案。 任何开具的发票和在断电期间发出的付款,都不会与快书同步. 对于任何不便,我们表示歉意,并将随时通知你,因为我们掌握了更多信息。 感谢你在我们努力解决这一问题时的理解.
9月1日晚11点19分左右, QuickBooks/Intuit在9月1日大约3点30分, 我们正在密切监测局势,以确保这一问题得到全面解决。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
在9月2日的6:45AM CT中, 我们确认快速书/Intuit API的出道影响 建筑一体化, 若您在建设财务公司和Lien免责管理公司之间的发票和支付同步中遇到任何问题,请通过电子邮件联系我们的支助小组:[email protected]或 call (800)655-8138。 谢谢你的耐心 我们对此可能造成的不便表示歉意.
自动翻译自官方事件更新。
目前正在调查2026年8月24日早上7点45分发现的一起事件的原因, 目前我们不知道事件的原因,也没有估计解决的时间。 我们将随时提供最新情况,我们赞赏你在努力解决这一问题时的耐心.
2026年8月24日早上7点45分, 对于任何不便,我们表示歉意,并将随时通知你,因为我们掌握了更多信息。 感谢你在我们努力解决这一问题时的理解.
2026年8月24日早上7点45分, ** 一旦问题得到解决,在此期间未发送的任何电子邮件或通知将自动重新审理。 ** 对于任何不便,我们表示歉意,并将随时通知你,因为我们掌握了更多信息。 感谢你在我们努力解决这一问题时的理解.
截止2026年8月24日9:52AMCST,我们确认解决了2026年8月24日大约7:45AMCST开始的电子邮件通知发送问题. 我们现在正在重新发送任何在事件期间没有发送的电子邮件通知. 你那边不需要任何行动 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
我们正在调查8月18日10:03AM CT发现的一起事件的原因. 2026年,影响CLA Draw Agent,导致抽取代理功能无法使用. 目前我们不知道事件的原因,也没有估计解决的时间。 我们将随时提供最新情况,我们赞赏你在努力解决这一问题时的耐心.
截止到2026年8月18日10点36分 AM CT,我们已经确认完全解析出 从10点03分开始的 Draw Agter出局 你那边不需要任何行动 一旦我们重新运行 受影响抽取的毒剂, 你会看到结果自动。 谢谢你的耐心 我们对此造成的任何不便表示歉意.
自动翻译自官方事件更新。
An incident was identified at 1:42 PM Central on Fri, 8/7, affecting Construction Financials and Lien Waiver Compliance and Payments due to a third-party vendor issue, with impacts to document signing and downloading. As of 5:24 PM Central on 8/7, we believe the issue has been resolved. We will continue to monitor the situation, and we appreciate your patience. We apologize for any inconvenience this may have caused.
The incident identified on Friday, 8/7, with impacts to document signing and downloading, has been fully resolved. All feature capabilities for Construction Financials and Lien Waiver Compliance and Payments have been restored. We appreciate your patience and apologize for any inconvenience this may have caused
We are currently investigating an incident identified at 9:57 AM CT on 8/4 that is impacting CLA, CLA+ and Construction Financials, causing latency and errors across portions of the product. We apologize for any inconvenience this may cause and are working to resolve the issue as quickly as possible.
At approximately 10:33 CT on 8/4, we implemented a fix for the latency issues across CLA, CLA+, and Construction Financials identified at roughly 9:58AM on 8/4. We are closely monitoring the situation to ensure the issue is fully resolved. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
As of 11:38 AM CT on 8/4, we've confirmed resolution of the latency and error issues affecting CLA, CLA+, and Construction Financials that began at roughly 9:57 AM CT on 8/4. No action is required from you or your team. Thank you for your patience. We apologize for any inconvenience this caused.
We are currently investigating an incident identified at 2:08 PM CT on 7/10 that is impacting all Built products, causing unexpected authentication prompts and unintended changes to feature access for some users. This incident was triggered by an outage from LaunchDarkly, a third-party provider. We apologize for any inconvenience this may cause and are working to resolve the issue as quickly as possible. At this time, we do not have any further details on the cause of the incident or an estimated time for resolution. We will provide updates as we have them, and we appreciate your patience while we work to resolve the issue.
At 3:18 PM CT on July 10, 2026, LaunchDarkly, our third-party feature flag provider, resolved the outage that was causing unexpected authentication prompts and unintended changes to feature access across Built products, beginning at roughly 2:08 PM CT on July 10, 2026. Our services have been restarted and are recovering, with full recovery confirmed at 4:00 PM CT. We are closely monitoring the situation to confirm the issue is fully resolved. No action is required on your part. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
We are currently investigating the cause of an incident identified at 2:00 PM CDT on June 29, 2026 impacting the Built borrower portal (CLA), causing issues with draw request submissions - users are unable to complete draw submissions and receive an error when clicking "Submit". At this time we do not know the cause of the incident or have an estimated time for resolution. We will provide updates as we have them, and we appreciate your patience while we work to resolve the issue.
We have identified the cause of the incident causing draw request submission issues across the CLA borrower portal beginning at roughly 2:00 PM CDT on June 29, 2026. We are working on a solution that will restore full functionality.We apologize for any inconvenience and will keep you informed as we have more information. Thank you for your understanding as we work to resolve the issue.
At approximately 2:55 PM CDT on June 29, 2026 we implemented a fix for the incident that caused draw request submission issues across the CLA borrower portal beginning at roughly 2:00 PM CDT on June 29, 2026. We are closely monitoring the situation to ensure the issue is fully resolved. Action required: If you attempted to submit a draw request during the outage window and received a "Failed to submit draw(s)" error, please refresh your browser session and re-submit your draw request. Draw requests that failed during the incident were not saved and will need to be re-entered. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
As of 3:05 PM CDT on June 29, 2026 we've confirmed full resolution of the draw request submission issues impacting the CLA borrower portal beginning at roughly 2:00 PM CDT on June 29, 2026. Action required: If you attempted to submit a draw request during the outage window and received a "Failed to submit draw(s)" error, please refresh your browser session and re-submit your draw request. Draw requests that failed during the incident were not saved and will need to be re-entered. Thank you for your patience. We apologize for any inconvenience this caused.
We have identified an issue affecting reporting where certain visuals may fail to load. We have determined this is caused by an outage with a third-party provider beginning at roughly 12:30pm CT on 06/22. We apologize for any inconvenience and are actively monitoring for resolution. If data does load, it is accurate. We will update this page as soon as service is restored. Thank you for your understanding as we work to resolve the issue.
At approximately 2pm CT a fix was implemented for the incident that caused the data visualization issues affecting reporting beginning at roughly 12:30pm CT on 06/22. We are closely monitoring the situation to ensure the issue is fully resolved. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
As of 2:30pm CT on 06/22 we’ve confirmed full resolution of the data visualization issues affecting reporting beginning at roughly 12:30pm CT on 06/22. Thank you for your patience. We apologize for any inconvenience this caused.
We are currently investigating the cause of an incident identified at 7 AM CT on 6/17 impacting reporting across all Built products, rendering Reporting inaccessible for some users. However, it appears that scheduled reports are still being delivered. At this time we do not know the cause of the incident or have an estimated time for resolution. We will provide updates as we have them, and we appreciate your patience while we work to resolve the issue.
At approximately 9:40 AM CT on June 17, 2026, we implemented a fix for the incident that caused reporting to be inaccessible across Built products beginning at roughly 7:00 AM CT on June 17, 2026. We are closely monitoring the situation to ensure the issue is fully resolved. No action is required from your team at this time. Reporting should now be accessible across all reporting tabs. Please note that Scheduled Exports were not impacted during this incident and all scheduled reports were delivered as expected. If you continue to experience issues, please reach out to your Built support contact. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
As of 12:30 PM CT we’ve confirmed full resolution of the issue that impacted reporting accessibility across all Built products beginning at roughly 7:00 AM CT on June 17. No action is required from you or your team. Please note that Scheduled Exports were not impacted during this incident and all scheduled reports were delivered as expected. Thank you for your patience. We apologize for any inconvenience this caused.
We have identified the cause of an incident identified at 8:55am CT impacting a vendor's ability to submit CLA+ orders. At this time we know the cause of the incident and we are working on deploying a resolution. We will provide updates as we have them, and we appreciate your patience while we work to resolve the issue.
At approximately 10:20am CT on June 10th 2026 we implemented a fix for the incident that caused an issue with vendors being able to submit orders in CLA+ beginning at 9:55am CT on June 10th 2026. We are closely monitoring the situation to ensure the issue is fully resolved. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
At approximately 10:22am CT on June 10th we implemented a fix for the incident that caused an issue with vendors being able to submit orders in CLA+. We are closely monitoring the situation to ensure the issue is fully resolved. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
As of 8:10 AM CT on 4/23/2026 we’ve confirmed full resolution of the loading issues impacting our legacy lien waivers platform beginning at roughly 3:45 PM CT on 4/22/2026. Thank you for your patience. We apologize for any inconvenience this caused.
We are currently investigating the cause of an incident identified at 7:45 AM CT on 4/23/2026 impacting our legacy lien waivers platform, causing issues loading the application. At this time we do not know the cause of the incident or have an estimated time for resolution. We will provide updates as we have them, and we appreciate your patience while we work to resolve the issue.
We are currently investigating the cause of an incident identified at 9 AM CT on 04/21 leading to integration pipeline failures. We are working on a solution that will restore full functionality. At this time we do not know the cause of the incident or have an estimated time for resolution. We will provide updates as we have them, and we appreciate your patience while we work to resolve the issue.
We have identified the cause of the incident leading to integration pipeline failures that was identified at 9 AM CT on 04/21. We are working on a solution that will restore full functionality. We apologize for any inconvenience and will keep you informed as we have more information. Thank you for your understanding as we work to resolve the issue.
At approximately 10:30 AM CT on 04/21 we implemented a fix for the incident that led to integration pipeline failures that was identified at 9 AM CT on 04/21. We are closely monitoring the situation to ensure the issue is fully resolved. Thank you for your patience during this time. We apologize for any inconvenience this has caused.
As of 10:45 AM CT on 04/21 we’ve confirmed full resolution of the issue that led to integration pipeline failures that was identified at 9 AM CT on 04/21. Thank you for your patience. We apologize for any inconvenience this caused.
We have identified the cause of the incident causing some inspectors not to be able to view their inspections on the schedule within the BIA app beginning on 4/10/2026. We are working on a solution that will restore full functionality. In the meantime, you can view and upload inspections through the website as usual. We apologize for any inconvenience and will keep you informed as we have more information. Thank you for your understanding as we work to resolve the issue.
As of 10 AM CT on 4/10/2026 we’ve confirmed full resolution of the issue impacting inspectors' ability to view inspections on the schedule within the Built Inspect app, beginning on 4/9/2026. Thank you for your patience. We apologize for any inconvenience this caused.